Oxygen cylinder hydrostatic pressure test equipment
About us (Raoyang Hongyuan Machinery Co.,Ltd)
Hebei Raoyang Hongyuan Machinery Co.,Ltd (Hebei Hydraulic test pump factory) is located in Raoyang,Hebei province,China. Our company have four main products series ,fire fighting machine (fire extinguisher filling machine ,fire extinguisher maintenance equipment), hose crimping machine , hydraulic test pump and metal band sawing machine , etc.
We have more than 20 years' export experience in our machines. Each month we export our machine not less than 50 sets . More than 81% of our products are widely exported to Europe,America,Southeast Aisa,The middle east and other countries and regions.where our poducts have good reputation.
Introduction of machine
A steel bottle type of test pressure loading and unloading machine in model of ZL-1/22.5-III is a third decade of improved test pressure device. Comparedwith early products, its main character is taking a pneumatic clamping device and a pneumatic facility for returning water to restored position (if the user want to use a manual way for claming, it can be order to make). Overcoming the every kind of the abuses in electronic way for returning water to restored position, our products have the higher equipment reliability and a more convenience for operation. In an old way, the returning water angle and the restored position are controlled by a journey switch. Due to the inertia moment will be changed as the loading change after the motor stop, the returning water angle and the restored position are very difficult to determine and the reliability of the journey switch is low, so it is very easy to take place an accident. However the determining the returning water angle and the restored position in a pneumatic device is determined by the stroke of the cylinder, so the returning water angle is stable and the restored position is reliable. In addition, the toppling speed of the steel bottle can be adjusted in no class by the anechoic throttle on the manual controlled valves of “returning water” and “restoring position”, which is easy and reliable.
The steel bottle test pressure loading machine is composed of two parts: 1. a loading bottle valve device and a returning water device; 2. an electric test pressure pump and a measuring cylinder. If the user does not need the test pressure pump part, this equipment will be changed into a bottle loading and returning water machine. The user can only use the function in the bottle loading and the returning water.
The steel bottle test pressure loading machine is for the test in the resist pressure, the volume distortion and the loading & unloading the bottle valve on the steel bottle (oxygen, hydrogen, nitrogen and CO2 etc.) by “a steel bottle safety monitor procedure”, according to the requirements for the steel bottle inspection and the bottle valve loading & unloading in the steel bottle manufacturer, the steel bottle inspection and the filling gas station. The machine gathers machinery, electricity and pneumatics and can realize the following three functions:
a. The loading & unloading the bottle valve;
b. The water pressure intensity test, the volume distortion measure & test;
c. The turning over for water fall.
The equipment structure is fastness, the performance is reliable, the technology is advanced, the operation is easy, which is a necessary use device in the steel bottle manufacturer, the steel bottle inspection and the filling gas station.
The performance parameters
1. The rational water test pressure P1=22.5MPa
2. The valve automatic control wrest moment on the spindle M1=300N·m
3. The maximal wrest moment on the spindle gas valve M2=450N·m
4. The returning water angle R=145O
5. The drive motor
The model Y90S-4
The power 1.1KW
The rotation speed 1390r/min
6. The power source: 380V/50HZ
7. The gas source: P=0.7-0.8Mpa(a safety gas)
8. The top & bottom stroke of the spindle S1=530mm
9. The stroke of the steel bottle clamping machine S2=100mm
10. The outer size:(length×width×height)
a. The main body size:1000×600×3000
b. The electric operation station:600×450×1150
(The electric box without the test pressure pump is installed on the main body of the equipment)
c. The electric test pressure pump: 655×480×1055
11. The weight(the main body):750Kg
12. The specification of the measured steel bottle:The diameter Φ210—Φ220
The height H=1200-1600
The photos of machine
We have abtained the ISO9001-2008 Certificate and CE Certificate, and Original of Certificate can be supplied if needed
Please contact me freely if you are interested in any item,
I will provide you with my best after-sales service ,best quality, and timely shipment.
You can send me E-mail or Fax 0086-318-7321606 or give me a call :86-18831809893